Anycubic PLA Basic Filament Texture Yellow 1Kg. Ideal usage: Architectural scale models, bust sculptures, functional prototypes, or low-stress household items where you want to minimize the visual appearance of print layer lines.

• Boosting Efficiency with Intelligent ldentification: Anycubic filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro & ACE 2 Pro, allowing for automatic identification of printing information and enhancing the printing experience.

• What it is: A matte, speckled grey finish designed to look and feel slightly textured rather than smooth and glossy. Ideal for architectural scale models, bust sculptures, functional prototypes, or low-stress household items where you want to minimize the visual appearance of print layer lines.
• Accuracy & Consistency: Anycubic 3D Printer PLA filament of 1.75mm diameter, minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
• Neat Spool & Premium Quality: The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely.
• Clog-Free & Bubble-Free: Designed and Manufactured with a Clog-Free to ensure a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother.
• For Most 3D Printers: The Anycubic Filament offers great compatibility with a wide range of temperatures and printing speeds, making it suitable for mainstream printers available on the market.

Measurements

• Item Weight: 1 Kilograms
• Item Diameter: 1.75 Millimeters

Additional details

• Material Type: PLA Texture
• Melting Point Temperature: 166°C
• Vicat Softening Temperature: 55°C
• Heat Deflection Temperature (0.45MPa): 54°C

Recommended Printing Parameters

• Printing Temperature (Nozzle): 190°C - 230°C (200°C - 215°C recommended)
• Heated Bed Temperature: 55°C - 65°C
• Recommended Print Speed: 50 - 200 mm/s (Supports high-speed printing)
• Max Volumetric Speed: 12 mm³/s
• Fan Speed: 100% cooling fan speed after initial layers
• Nozzle Compatibility: Standard brass or stainless steel nozzles (0.4 mm recommended)